• aurora latex mattress
  • aurora latex mattress

Aurora Latex

 

$1,700$2,600

Clear
  • You weigh under 70kgs – get a “6”
  • You weigh under 70-90kgs – get an “8”
  • You weigh over 90kgs – get a “9”
Confused? take the Firmness quiz
  • Locally made

  • Adjustable to 14 different firmnesses

  • $2 per km fast delivery within 100kms of Marrickville

  • Free Delivery within 15kms from Marrickville

  • 3 months comfort guarantee

Honeycomb Springs

Non-zoned and optimally arranged

Typical pocket spring sets contain 870 coils. Ours are 1160 pocket springs arranged in a honeycomb formation.  This arrangement prevents the need for firmer coils (zones) under the hips which can be very uncomfortable.

5 cm Dunlop pour method Natural Latex

Certified by eco-institut

There is no other foam in the world that is as natural as Dunlop latex. This will last 4 times longer than any other plastic-based foam product. 

2000 micro-coils

Airflow and conformity

Ventilation and comfort. This is where the Aurora gets its signature “huggie feel”. This reduces pressure on the hips and shoulders.

Protective latex layer

Super flexible layer

This layer is a highly elastic latex layer. Comfort is elasticity, and this layer allows the pocket springs to be used to their full potential.

Zip-off cover

Access the entire mattress inside

Our zip-off over gives you access to all of the interior components. This will allow you to make up to 14 different adjustments. That’s 14 mattresses in 1!

Bottom Cover

Completely removable from the rest of the mattress

This cover can be taken off to expose the whole spring system. This allows ausbeds to be able to change any component of the mattress.

  • Honeycomb Springs

    Non-zoned and optimally arranged

    Typical pocket spring sets contain 870 coils. Ours are 1160 pocket springs arranged in a honeycomb formation.  This arrangement prevents the need for firmer coils (zones) under the hips which can be very uncomfortable.

  • 5 cm Dunlop pour method Natural Latex

    Certified by eco-institut

    There is no other foam in the world that is as natural as Dunlop latex. This will last 4 times longer than any other plastic-based foam product. 

  • 2000 micro-coils

    Airflow and conformity

    Ventilation and comfort. This is where the Aurora gets its signature “huggie feel”. This reduces pressure on the hips and shoulders.

  • Protective latex layer

    Super flexible layer

    This layer is a highly elastic latex layer. Comfort is elasticity, and this layer allows the pocket springs to be used to their full potential.

  • Zip-off cover

    Access the entire mattress inside

    Our zip-off over gives you access to all of the interior components. This will allow you to make up to 14 different adjustments. That’s 14 mattresses in 1!

  • Bottom Cover

    Completely removable from the rest of the mattress

    This cover can be taken off to expose the whole spring system. This allows ausbeds to be able to change any component of the mattress.

Find out why the Aurora gets flawless reviews

Every layer and every component of the Aurora has been intensely scrutinized. If there isn’t a good reason for it, it doesn’t go in. This is important because unnecessary layers inside a mattress will give the mattress more ability to store body heat. Also, the comfort layer is made with pure latex and over 2000 micro-coils.

Sustainably produced from rubber trees, The Aurora uses 1160 honeycomb nested pocket springs. This is 30% more springs than the usual pocket spring unit.

The comfort material used in 99% of mattresses is plastic. If it’s memory foam, it’s plastic, if it’s gel, it’s plastic. The Aurora uses tree sap. This material has 4 x the durability of the foam used by larger manufacturers. This difference in material usage means everything when it comes to mattresses. 

The Aurora can be zipped apart to expose the inside. Usually, mattress companies do not want you to see this. At Ausbeds, we are proud of the materials we use and we want people to understand these components. 

There is no other Latex hybrid with a zipper on the Australian market. When you buy the Aurora, you aren’t just buying a mattress. You are entering the Ausbeds eco-system. Within this system, you can adjust the mattress into 14 different combinations.

We have a team that will race out to swap out the springs, swap the latex, change the micro spring layers around so that you can find the right comfort. This is the most important thing to us. 

We have a purpose-built factory for exactly this function. This is why we only deliver within 100kms. It’s because within this radius our team can personally go and assist you. Not a courier.

When you’re buying an Aurora, you’re buying a unique level of service that no other mattress company can provide. The highest quality components with a dedicated team that is here to support you. 

Everyone has terrible mattress stories, make your next mattress story a good one. Get an Aurora and join all the other people that have great mattress stories. Just google ausbeds reviews to see for yourself. See if you can find a bad review. Everyone is taken care of.

Karl van Lieshout, Founder, Owner, Operator of Ausbeds Mattress Factory in Marrickville Sydney.


Component Specs

Top layer

Tencel quilting

Second layer

5cm Pure latex (Dunlop pour method)

Third layer

2000 Microsprings

Support

1160 Pocket springs (Honeycomb set)

Cover

Fully removable for easy alterations

Reviews


Best experience purchasing a bed

“The best thing that I like about the mattress is that the firmness can be easily adjusted. We bought a Aurora 8 which is a firm mattress but really comfy. Very happy with our purchase.”

5 Stars – Henry. March 2022

Google Reviews

This is what I want! Best mattress !

“The customer service at Ausbeds is exceptional. The mattress comfort options are many. We purchased the very firm Aurora 9 King as hubby has a builder’s back and finds a firm mattress gives him relief. We also went for the cotton organic top since he is a hot sleeper and found our previous memory foam mattress unbearably hot in the summer months. It had also slumped after 8 years and was causing both of us to have a sore back. We have now slept on the Aurora 9 for 10 nights and our backs are loving it. READ THE WHOLE REVIEW
5 Stars – JAF December 2021


Ability to change the firmness

I have had lots of lower back pain for the last 6 weeks, and decided I needed a new bed. I first checked out Snooze – but their beds were ridiculously expensive. After doing lots of research, I settled on going to ausbeds and testing their beds out. Karl explained the different options and showed me how the bed can be customised to be softer to more firm. I really liked the feel of the bed and the ability to change the layers if I felt the bed would be too firm. Karl had my new Aurora bed, level 8 delivered to my house the same day. I’ve been sleeping well with no back pain ever since! Thank you!

5 Stars – Henry. March 2022

Google Reviews

A great bed from a great business

“This is my second bed from Ausbeds and I continue to be impressed. The modular design gave me peace of mind when purchasing but ultimately we got it right the first time with the help of Carl and the team. I actively recommend Ausbeds to friends and. family. They are super comfortable, fairly priced for being Aussie made and great quality. We are sleeping great on the new bed, hell we were still sleeping great on our old one still, we just wanted to move to a king size. I’d also like to shout of their delivery team who went above and beyond :)”

5 Stars – Richard. February 2022


Dreamy, sleep-inducing luxury!

“The quality of the beds is a stand-out from other mattresses I’ve purchased – I love the fact that they zip right open so you can see what your mattress is made of. The beauty of having the access to zip open your bed is that you also have the flexibility to make it firmer or softer if you need. “

5 Stars – Richard. February 2022


Aurora Mattress Construction

The Aurora is Australia’s only Latex Hybrid zippable mattress.

The component system allows us to be able to swap components in and out of the mattress at any point.

This is how we are able to fit people to mattresses so well. There are many mattress feels to choose from even after delivery. 

Ausbeds Factory/Showroom

136 Victoria rd, Marrickville
Sydney phone 02 8999 3333

Factory Open To The Public

Mon-Fri 10am - 5pm
Sat-10am - 1pm
Sunday-Closed